The news is the "power module" for the gestion of the Vbatt: The actual version of TMA or similar adapters (As it has been copied by all the others cables productors) connect directly the 5V of the USB to the VBATT; In this scenario the mobile is always powered and when a box ned to repower the mobile for a reboot this doesn抰 happen and we get failure in the job we are doing. With this power modune instead the vpp to the mobile is sent always from the USB, so the power problem is sorted as, if we use an usb charger or a good powered HUB we can have up to 1A to power up the mobile but the gestion of when it must be powered or not is under the gestion of the Box.

As well some adapters send the 5V of the usb to the box as well so you can have error on the self test (as the box see the VPP always 5V when it should be 0V if needed) or damage the box as well.

I think I don抰 need to add using this cable you can抰 damage the box if the mobile is shorted.

Add on top the perfect gestion of the BSI correction always present in the TMA history and you can realise easy it is THE LOCAL MODE FINAL SOLUTION.